X
  • Rajshri PVC Door - Solid Panel

    30mm Rajshri Solid Panel PVC Doors are made up of 5mm PVC Sheets and have reinforcement of MS frame. These doors have proven performance for more than 8 years in water splash areas like toilets / bathrooms. The construction of Rajshri Solid Panel PVC Doors provides unmatched performance unlike other plastic doors, which fail on performance. Rajshri Solid Panel PVC Doors perform like wood while offering durability of plastic. Rajshri Solid Panel PVC Doors in good number have been installed in various military barracks and are performing satisfactorily till date in spite of their rough usage.

  • Rajshri PVC Door - Printed Panel

    Rajshri Solid Panel PVC door can be made decorative by using PVC Beadings which are readily available in the market. These beadings are used in place of the exposed portion of the PVC Sheet edges. The entire door can be made using printed sheets available in various wood grain designs and colours.

  • Rajshri PVC Door - PreLam

    Rajshri Both Side and Single Side Prelam Solid Panel PVC Doors are made from 5mm prelam PVC Sheet and are equivalant to expensive teak wood doors. Rajshri Both Side Prelam Solid Panel PVC Doors have a decorative wood like veneered look and are ideally suitable as internal doors in bedroom, living room etc. The available wide range of laminated finish, provides the choice to select the door most suitable as per the interior decor and finish of the room.

  • Rajshri PVC Door - Partly Glazed

    30mm Rajshri Partly Glazed Solid PVC Door have stiles and rails made of 5mm thick Rajshri PVC Sheet with internal reinforcement of M.S, tube. Glass pane of 5mm thickness is fitted in left out space above the lock rail. And the second panel below the rockrail is of 5mm Rajshri PVC Sheet. Their appearance is almost the same as of Rajshri Fully Glazed Solid PVC Door. Here the difference is of top 5mm PVC sheet Panel, below the lock rail, replaced with 5mm glass pane.

  • Rajshri PVC Door - Fully Glazed

    30mm Rajshri Fully Glazed Solid PVC Doors are use the same construction as of Rajshri Solid Panel PVC Door but left to solid 5mm PVC Panel is replaced with 5mm glass panel. In these doors lock rails is also reinforced with M.S. Tube and space avoid the cracking of glass at the time of fixing hardware on teh stiles and lock rails. Glass pane of 5mm thickness is fitted in left, out spaces above and below the lock rail. Their aesthetic look and performance matches with the good quality fully glazed wooden doors. They are 100% water and termite proof.

  • Rajshri PVC Door - Wiremesh

    30mm Rajshri Wire Mesh Solid PVC Door is a fully Wire Gauzed door with its stiles and rails made out of 5mm Rajshri PVC Sheets. Rajshri Wire Gauzed Solid PVC Doors are idealy suitable as an extra mosquito mesh doors for Gallery, Balcony and entrance. The stiles and rails are internally reinforced with M.S. frame for high dimensional stability.

  • Rajshri PVC Door - PVC Profile

    Rajshri factory made 28mm thick Rajshri Solid rigid PVC profile door, 3.5mm thick high pressure laminate sheet is used as infill panel with decorative PVC beading at the open edges of stiles and rails made with extruded foam PVC profile sheet monitoring glossy and high density surface. Rajshri PVC profile doors have silky matt surface finish. These doors being scratch resistant possess excellent screw holding capacity and mounting decorative hardware's is feasible at user's choice.

  • Rajshri PVC Door - Double Leaf Panel

    Rajshri Double Leaf Solid Panel PVC Doors are same in appearance as Rajshri Solid Panel PVC doors with only difference that these are double doors fixed in a single door frame. These doors are suitable where the width of wall opening is bigger than 3 ft as the recommended width of single door is 3 ft maximum, in terms of looks and appearance, they are also ideal to use, where opening space, for the door is limited.

  • Rajshri PVC Door - EPS Panel

    The surface skin of the panel of Rajshri Single EPS Panel PVC Doors is made out of 100% PVC sheet, which is foamed using chemicals so as to make it light weight and give it a silky matt surface finish and the panel's inner core is of high density EPS (Expanded Poly Styrene). This sandwich construction results in a solid , strong and lightweight panel. The panel is bonded permanently to the stiles & rails using solvent cement adhesive. Stiles & rails are made from 4mm thick PVC Sheets. The wall thickness of 4mm ensures very good screw holding strength. All types of fixtures can be fitted on the stiles & rails as desired. Rajshri single EPS panel PVC doors can be fitted on existing wooden or metal door frames.

  • Rajshri PVC Door - EPS Rounded Panel

    The surface skin of the panel of Rajshri Rounded Single EPS Panel PVC Doors is made out of 100% PVC sheet, which is foamed using chemicals so as to make it light weight and give it a silky matt surface finish and the panel's inner core is of high density EPS (Expanded Poly Styrene). This sandwich construction results in a solid , strong and lightweight panel. The panel is bonded permanently to the stiles & rails using solvent cement adhesive. Stiles & rails are made from 4mm thick PVC Sheets. The wall thickness of 4mm ensures very good screw holding strength. All types of fixtures can be fitted on the stiles & rails as desired. Rajshri single EPS panel PVC doors can be fitted on existing wooden or metal door frames.

  • Rajshri PVC Door - Moulded Solid Core

    Rajshri Moulded PVC Doors are made from moulded PVC Sheet stuck surface on an internal routed solid core of wood. Through thermoforming process artistic designs are carved on PVC sheet, which gives the door a look of high quality, artistically carved wooden door. These doors are suitable for use as main door, balcony doors or other internal doors where along with elegance and pleasing looks where security is of prime concern and a solid and heavy door is desired.

  • Rajshri PVC Door - Moulded Wood Free

    The surface skin of the panel of Rajshri Moulded Woodfree PVC Doors is made out of 100% PVC sheet, which is foamed using chemicals so as to make it light weight and give it a silky matt surface finish and the panel's inner core is of high density EPS (Expanded Poly Styrene). This sandwich construction results in a solid , strong and lightweight panel. The panel is bonded permanently to the stiles & rails using solvent cement adhesive. Stiles & rails are made from 4mm thick PVC Sheets. The wall thickness of 4mm ensures very good screw holding strength. All types of fixtures can be fitted on the stiles & rails as desired. Rajshri single EPS panel PVC doors can be fitted on existing wooden or metal door frames.

  • Rajshri PVC Door - Moulded Rounded

    Rajshri Moulded Rounded PVC Doors are made from moulded PVC Sheet stuck surface on an internal routed solid core of wood. Through thermoforming process artistic designs are carved on PVC sheet, which gives the door a look of high quality, artistically carved wooden door. These doors are suitable for use as main door, balcony doors or other internal doors where along with elegance and pleasing looks where security is of prime concern and a solid and heavy door is desired.